Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)
Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)

Forza Flat Discs replacement for Alcon DIV2135X436C24L, DIV2135X436C24R (Pair)

Sold out
$1,059.00
SKU FFD.335.28.218.FAL/R
Direct replacement for:

• Alcon DIV2135X436
• Alcon DIV2135X436C24L/R
• DBA52901.1
• DBA52901.1S
• DBA52901.1NS
• PWR 335mm CAR98 Alcon Kits (Front)
• PWR 335mm CAR36 Alcon Kits (Rear)
• Motorsport Brakes 335mm CAR98 Alcon Kits (Front)
• Motorsport Brakes 335mm CAR36 Alcon Kits (Rear)

Specifications:

• Diameter 335mm
• Thickness 28mm
• Annulus 50mm
• Air gap 14mm
• Offset 0mm
• PCD 12 x 218mm
• Holes 6.4mm
• Inside Diameter 235mm
• Flange Inside Diameter 204mm
• Flange Thickness 5.3mm
• Vanes 48

Straight from Forza's motorsport line of rotors, proven for over a decade in top-level motorsport, including the Australian Rally Championship, TCR Australia, Saloon Car and Formula 3!

• High carbon metallurgy:
- Optimal thermal conductivity.
- Improved heat dissipation.
- Inherently high resistance to distortion and thermal cracking.
- Lower rotor wear.
- Reduced levels of brake judder and noise from increased damping capacity.

• 48 Directionally curved vanes:
 Dramatically improved cooling over straight or pillar-constructed rotors with higher airflow as the rotor acts as a centrifugal pump.
- Improved strength and resistance to cracking compared to a pillar-constructed rotor.
- Smoother entry and exit of airflow through the rotor.

• Heat-treated castings:
- Prevents deformation.
- Strengthens the bonds between the molecules.
- Relieves stresses induced by the casting process.

• 10 Forward-facing curved slots:
- Superior modulation and control.
- Lower overall disc and pad wear.
- The best balance between initial response and longevity.

• Superior finish
- Zinc/Aluminium coating prevents rust in the slots and unswept area, maximising aesthetics and preventing pad material build-up in the slots for improved long-term performance.
- Thermal marking paint to monitor top temperatures reached and make pad selection easier.