Forza Brakes is an Australian-owned and operated performance and motorsport brake brand. With extensive experience in TCR Australia, the Australian Rally Championship, Formula 3 and Saloon Car, their products are tested in the harshest motorsport environments.
With replacement flat discs to suit most applications, and the ability to make new sizes with low minimum orders, Forza has motorsport and performance requirements covered.
Their FP3 street and track pad is ideally suited for street cars that do regular track work, and quickly became known as the "unicorn pad" due to its unique combination of track-level performance with low rotor wear, low noise, and low cost—a blend previously considered rare or "mythical" in the automotive world!
Looking for a high-performance street pad for the occasional track day? Don't go past the FP2: Engineered with a ceramic compound, these pads provide superior braking power, efficient heat dissipation and quieter operation for a safer and smoother ride in your daily driver!
Replaces: • AP Racing CP5000-312/313 Specifications: • Diameter 280mm • Thickness 25.4mm • Annulus 44mm • Air gap 14mm • Offset 0mm • PCD 8 x 1...
View full details
Replaces: • AP Racing CP5000-312/313 Specifications: • Diameter 280mm • Thickness 25.4mm • Annulus 44mm • Air gap 14mm • Offset 0mm • PCD 8 x 1...
View full details
Specifications: • Diameter 280mm • Thickness 22mm • Annulus 43mm • Air gap 10mm • Offset 0mm • PCD 8 x 175mm • Holes 9.5mm x 15mm rectangle • Ins...
View full details
Specifications: • Diameter 280mm • Thickness 22mm • Annulus 43mm • Air gap 10mm • Offset 0mm • PCD 8 x 175mm • Holes 9.5mm x 15mm rectangle • Ins...
View full details
Specifications: • Diameter 288mm • Thickness 28mm • Annulus 54.5mm • Air gap 14mm • Offset 0mm • PCD 11 x 167mm • Holes 8mm x 10mm elongated • In...
View full details
Specifications: • Diameter 287mm • Thickness 28mm • Annulus 52mm • Air gap 14mm • Offset 0mm • PCD 11 x 168mm • Holes 8mm x 10mm elongated • Insi...
View full details
Replacement rings for: • Forza F2D.281.22.CAL/R suit rear of SW20 MR2 Specifications: • Diameter 281mm • Thickness 22mm • Annulus 48mm • Air ga...
View full details
Specifications: • Diameter 280mm • Thickness 11mm • Annulus 44mm • Air gap SOLID • Offset 0mm • PCD 9 x 173mm • Holes 8mm x 10mm elongated • Insi...
View full details
Replaces the discontinued DBA52454.1S rotor: • Diameter 280mm • Thickness 21mm • Annulus 54mm • Air gap 10mm • Offset 0.5mm • PCD 10 x 160mm • Ho...
View full details