Forza Flat Discs replacement for DBA52069.1S, DBA52069.1XD, DBA52069.1OESL/SR (Pair)

• Diameter 372mm
• Thickness 28mm
• Annulus 62.5mm
• Air gap 14.5mm
• Offset 0mm
• PCD 12 x 228mm
• Holes 6.4mm
• Inside Diameter 247mm
• Flange Inside Diameter 211mm
• Flange Thickness 6.45mm
• Vanes 72

Straight from Forza's motorsport line of rotors, proven for over a decade in top-level motorsport, including the Australian Rally Championship, TCR Australia, Saloon Car and Formula 3!

• High carbon metallurgy:

- Optimal thermal conductivity.

- Improved heat dissipation.

- Inherently high resistance to distortion and thermal cracking.

- Lower rotor wear.

- Reduced levels of brake judder and noise from increased damping capacity.

• 72 Directionally curved vanes:

 Dramatically improved cooling over straight or pillar-constructed rotors with higher airflow as the rotor acts as a centrifugal pump.

- Improved strength and resistance to cracking compared to a pillar-constructed rotor.

- Smoother entry and exit of airflow through the rotor.

• Heat-treated castings:

- Prevents deformation.

- Strengthens the bonds between the molecules.

- Relieves stresses induced by the casting process.

• 10 Forward-facing curved slots:

- Superior modulation and control.

- Lower overall disc and pad wear.

- The best balance between initial response and longevity.

• Superior finish

- Zinc/Aluminium coating prevents rust in the slots and unswept area, maximizing aesthetics and preventing pad material build-up in the slots for improved long-term performance.

- Thermal marking paint to monitor top temperatures reached and make pad selection easier.