Forza Flat Discs 343x28mm 215.9mm PCD replacement for Alcon R98B03-06P6E CAR98 (Pair)
$1,059.00
SKU FFD.343.28.215.FAL/R
Interchangeable with:
• AP Racing CP6565-160/161
• Alcon DIV2175X521C24L/R
Fits the following Alcon CAR36/CAR98 rear Advantage Extreme kits:
• R98B03-01F7E - BMW E46 M3 Rear
• R98B03-06F7E - BMW E90 Rear
• R98B03-26F7E - BMW E90/92 Rear (320 & 325)
• R98B03-06P6E - BMW E90 Rear
• R98B03-26P6E - BMW E90/92 Rear (320 & 325)
• R36A03-23F7D - Mitsubishi Evo 10 Rear
Specifications:
• Diameter 343mm
• Thickness 28mm
• Annulus 51mm
• Air gap 14mm
• Offset 0mm
• PCD 12 x 215.9mm
• Holes 6.4mm round
• Inside Diameter 235mm
• Flange Inside Diameter 200mm
• Flange Thickness 6.5mm
• Vanes 48
Straight from Forza's motorsport line of rotors, proven for over a decade in top-level motorsport, including the Australian Rally Championship, TCR Australia, Saloon Car and Formula 3!
• High carbon metallurgy:
- Optimal thermal conductivity.
- Improved heat dissipation.
- Inherently high resistance to distortion and thermal cracking.
- Lower rotor wear.
- Reduced levels of brake judder and noise from increased damping capacity.
• 48 Directionally curved vanes:
Dramatically improved cooling over straight or pillar-constructed rotors with higher airflow as the rotor acts as a centrifugal pump.
- Improved strength and resistance to cracking compared to a pillar-constructed rotor.
- Smoother entry and exit of airflow through the rotor.
• Heat-treated castings:
- Prevents deformation.
- Strengthens the bonds between the molecules.
- Relieves stresses induced by the casting process.
• 10 Forward-facing curved slots:
- Superior modulation and control.
- Lower overall disc and pad wear.
- The best balance between initial response and longevity.