Forza Flat Discs 380x35mm for FK8 Honda Civic Type R TCR Racecar (Pair)
$1,219.00
SKU FFD.380.35.242.X20.7T.FL/R
Specifications:
• Diameter 380mm
• Thickness 35mm
• Annulus 55mm
• Air gap 19.5mm
• Offset 0mm
• Lug Dimensions 13.9mm x 7mm
• Number of Lugs 20
• Inside Diameter 270mm
• Lug Inside Diameter 242.3mm
• Vanes 72
Specifications:
• Diameter 380mm
• Thickness 35mm
• Annulus 55mm
• Air gap 19.5mm
• Offset 0mm
• Lug Dimensions 13.9mm x 7mm
• Number of Lugs 20
• Inside Diameter 270mm
• Lug Inside Diameter 242.3mm
• Vanes 72
Straight from Forza's motorsport line of rotors, proven for over a decade in top-level motorsport, including the Australian Rally Championship, TCR Australia, Saloon Car and Formula 3!
• High carbon metallurgy:
- Optimal thermal conductivity.
- Improved heat dissipation.
- Inherently high resistance to distortion and thermal cracking.
- Lower rotor wear.
- Reduced levels of brake judder and noise from increased damping capacity.
• 72 Directionally curved vanes to meet required FIA homologation:
Dramatically improved cooling over straight or pillar-constructed rotors with higher airflow as the rotor acts as a centrifugal pump.
- Improved strength and resistance to cracking compared to a pillar-constructed rotor.
- Smoother entry and exit of airflow through the rotor.
• Heat-treated castings:
- Prevents deformation.
- Strengthens the bonds between the molecules.
- Relieves stresses induced by the casting process.
• 10 Forward-facing curved slots
- Superior modulation and control.
- Lower overall disc and pad wear.
- The best balance between initial response and longevity.
• High carbon metallurgy:
- Optimal thermal conductivity.
- Improved heat dissipation.
- Inherently high resistance to distortion and thermal cracking.
- Lower rotor wear.
- Reduced levels of brake judder and noise from increased damping capacity.
• 72 Directionally curved vanes to meet required FIA homologation:
Dramatically improved cooling over straight or pillar-constructed rotors with higher airflow as the rotor acts as a centrifugal pump.
- Improved strength and resistance to cracking compared to a pillar-constructed rotor.
- Smoother entry and exit of airflow through the rotor.
• Heat-treated castings:
- Prevents deformation.
- Strengthens the bonds between the molecules.
- Relieves stresses induced by the casting process.
• 10 Forward-facing curved slots
- Superior modulation and control.
- Lower overall disc and pad wear.
- The best balance between initial response and longevity.