Forza Slotted Flat Discs 330x32mm 190.5mm PCD suit K Sport Big Brake Kits (Pair)
$1,059.00
SKU FFD.330.32.190.GAL/R
Interchangeable with:
• John Bowe Edition Front AP Racing Setup (rear rotors also available, F1D.315.18.CAL/R)
• K Sport 330x32mm (some, check bolt hole size)
• D2 Racing 330x32mm (some, check bolt hole size)
• MTEC MTEC330.32.191
Specifications:
• Diameter 330mm
• Thickness 32mm
• Annulus 57mm
• Air gap 17mm
• Offset 1mm
• PCD 12 x 190.5mm
• Holes 8mm x 10mm elongated
• Inside Diameter 216mm
• Flange Inside Diameter 165mm
• Flange Thickness 7.7mm
• Vanes 48
Straight from Forza's motorsport line of rotors, proven for over a decade in top-level motorsport, including the Australian Rally Championship, TCR Australia, Saloon Car and Formula 3!
• High carbon metallurgy:
- Optimal thermal conductivity.
- Improved heat dissipation.
- Inherently high resistance to distortion and thermal cracking.
- Lower rotor wear.
- Reduced levels of brake judder and noise from increased damping capacity.
• 48 Directionally curved vanes:
Dramatically improved cooling over straight or pillar-constructed rotors with higher airflow as the rotor acts as a centrifugal pump.
- Improved strength and resistance to cracking compared to a pillar-constructed rotor.
- Smoother entry and exit of airflow through the rotor.
• Heat-treated castings:
- Prevents deformation.
- Strengthens the bonds between the molecules.
- Relieves stresses induced by the casting process.
• 10 Forward-facing curved slots:
- Superior modulation and control.
- Lower overall disc and pad wear.
- The best balance between initial response and longevity.