FFD.330.34.183.GAL/R | Forza Replacement Discs For GU/GR Y61 Nissan Patrol 4 Piston Brake Kit (Pair)
$949.00
SKU FFD.330.34.183.GAL/R
For more information or to order the Forza kit, refer to this listing:
Specifications:
• Diameter 330mm
• Thickness 34mm
• Annulus 65mm
• Air gap 16.7mm
• Offset 0mm
• PCD 12 x 183mm
• Holes 8mm elongated
• Inside Diameter 196mm
• Flange Inside Diameter 158mm
• Flange Thickness 7mm
• Vanes 48
• Thickness 34mm
• Annulus 65mm
• Air gap 16.7mm
• Offset 0mm
• PCD 12 x 183mm
• Holes 8mm elongated
• Inside Diameter 196mm
• Flange Inside Diameter 158mm
• Flange Thickness 7mm
• Vanes 48
Straight from Forza's motorsport line of rotors, proven for over a decade in top-level motorsport, including the Australian Rally Championship, TCR Australia, Saloon Car and Formula 3! Rotors designed specifically for the Patrol upgrade:
• High carbon metallurgy:
- Optimal thermal conductivity.
- Improved heat dissipation.
- Inherently high resistance to distortion and thermal cracking.
- Lower rotor wear.
- Reduced levels of brake judder and noise from increased damping capacity.
• 48 Directionally curved vanes:
- Improved cooling with higher airflow as the rotor acts as a centrifugal pump.
- Improved strength and resistance to cracking compared to a pillar-constructed rotor.
- Smoother entry and exit of airflow through the rotor.
• Heat-treated castings:
- Prevents deformation.
- Strengthens the bonds between the molecules.
- Relieves stresses induced by the casting process.
• 10 Forward-facing curved slots:
- Superior modulation and control.
- Lower overall disc and pad wear.
- The best balance between initial response and longevity.
- Slots are only placed where the pad sweeps, helping eliminate uneven rotor/pad wear.
• Two-piece floating design:
- Lighter - less unsprung weight - improved handling, steering and braking.
- Less heat soak into the wheel bearings.
- Prevents pad knock-off.
- Better performing and quality rotor than single-piece options.
- Replaceable discs. Hats are hard anodised and will never need to be replaced unless damaged.
- Sprung bobbin to eliminate the rattle common on full-race setups.
• Superior finish
- Zinc/Aluminum coating prevents rust in the slots and unswept area, maximizing aesthetics and preventing pad material build-up in the slots for improved long-term performance.
- Thermal marking paint to monitor top temperatures reached and make pad selection easier.